Level Check
The Level Check module provides loudness, peaks and RMS measurements about your layers. It’s also able to provide those measurements within spectral selections, and locate the time position where peaks and maximum occurs.
Measurements are calculated automatically while the module is displayed, on the selected layers. If a selection exists, only the content inside the selection is measured. This module only measures: it has no Apply button.
-
All Layers: Measure the mix of all layers instead of the selected layers. -
AES17 RMS: Show RMS levels following the AES17 standard, where a full-scale sine wave reads 0 dB instead of -3 dB.
-
Export…: Export all the measurements to a CSV file.
For each channel, the module shows the true peak level, the sample peak level, the maximum, minimum and total RMS levels (in dB), and the DC offset (in percents). For the mix of all channels, it shows the maximum momentary loudness, the maximum short-term loudness and the integrated loudness (in LUFS), and the loudness range (LRA, in LU).
Click a value followed by an arrow to move the playhead to the position where it occurs.